Public Display Solicitation
You must Log in with your eHawaii Account to respond to a solicitation.
B25001857 Baldwin HS & King Kekaulike HS - Sump Pump Replacement
- Solicitation Number
- B25001857
- Status
- Awarded
- Department
- Accounting and General Services
- Division
- Central Services
- Islands (where the work/delivery is to be performed)
- Maui
- Category
- Construction
- Release Date
- 03/04/2025
- Offer Due Date & Time
- 04/04/2025 02:00 PM
- Description
- Remove and replace sewage submersible pumps including relays, sensors at Baldwin High School behind building H and at King Kekaulike High School located at the northeast and of the stadium. See Line Item Details.
- Contact Person
- Ralph, Peter J
- peter.j.ralph@hawaii.gov
- Phone
- 808-873-3947
- General Comments
- Bidders shall possess a valid Hawaii Contractors License in accordance with HRS Chapter 444.
It is strongly advised for the Contractor or its representative(s) to visit the site for an accurate assessment.
The Contractor or its representative(s) shall check into the front office before proceeding onto the campus.
The award shall be made to the lowest responsive and responsible bidder subject to the availability of funds. The State of Hawaii reserves the right to cancel this IFB and/or reject all offers in whole or in part when it is determined to be in the best interest of the State of Hawaii.
All changes or alterations to the existing design or specifications shall be first approved by the solicitor and/or authorized representative of DAGS. - Procurement Officer
- Eric Agena
- Attachments
-
BALDWIN HS Site Sump Location.pdf
KING KEKAULIKE HS Sump Site Location.pdf
AG-008 103D General Conditions (1.10.23).pdf
Download All
Direct all questions regarding this Solicitation, and any questions or Issues relating to the accessibility of this Solicitation (Including the appendices and exhibits to this Document, and any other document related to this Solicitation), to: Ralph, Peter J.
B25001857 Baldwin HS & King Kekaulike HS - Sump Pump Replacement
#
Title
Quantity
Unit of Measure
Commodity Code
Commodity Code | Description |
---|---|
238220 | Mechanical contractors |
238220 | Sump pump installation |
238220 | Plumbing contractors |
- Quantity
- 1
- Unit of Measure
- JOB
- Title
- Baldwin High School - Behind Building H - Sump Pump Replacement
- Description
- Remove and replace with new two (2) submersible pumps including relays, sensors and all material, labor, tools and equipment required for a full functional and operational lift station with no defects. Lift station (sump) is located behind building H at Baldwin HS. See attached drawings and location map. Existing submersible pumps shall be removed and properly disposed by the bidder. The specifications for the two (2) new pumps to be provided and installed by the bidder shall be as follows:
• Product type Sewage Pump
• Application High head sewage pump
• Operation Manual
• Horsepower 1 HP
• Voltage 230 Volts
• Phase 1
• Frequency 60 Hz
• Speed 3450 RPM
• Impeller Type Recessed vortex
• Pump Housing Material Cast iron
• Discharge Connection 2 inch flanged NPT 2 bolt vertical
• Impeller Material Ductile iron
• Maximum Flow 125 GPM
• Maximum Head 55 ft.
• Maximum Solids Handling 2 inch
• Cord length 20 ft.
• Maximum Fluid Temperature 140 °F
Commodity Code | Description |
---|---|
238220 | Mechanical contractors |
238220 | Sump pump installation |
238220 | Plumbing contractors |
- Quantity
- 1
- Unit of Measure
- JOB
- Title
- King Kekaulike High School - Stadium Sump Pump Replacement
- Description
- King Kekaulike High School:
Remove and replace with new two (2) submersible pumps including the full rail support system, top rail support and chain lifting package, and all materials, labor, tools and equipment as required for a full functional and operational lift station with no defects. Lift station (sump) is located on the northeast end of the stadium. See attached location map and drawings. Existing submersible pumps shall be removed and properly disposed by the bidder. The specifications for the two (2) new pumps to be provided and installed by the bidder shall be as follows:
• Voltage 3 Φ, 200V, 60 HZ
• Horsepower 2.0 HP
• Amp Draw (Full load) 10.4
• Motor Type Permanent Split Capacitor (PSC)
• RPM 3450
• Maximum Head Up to 71 ft.
• Maximum Capacity Up to 215 GPM
• Switch Type Manual
• Minimum Sump Diameter Simplex: 24 in. Duplex: 36 in.
• Discharge Pipe Size 2.0 in. NPT (3.0 in. optional)
• Maximum Solids Handling Size 2.0 in.
• Impeller Type Ductile Iron, Recessed
• Impeller Diameter 4.56 in.
• Cord Length 20 ft.
• Cord Size 16/4; Type: SJOW/SJOW-A
• Body Construction Cast Iron
• Maximum Liquid Temperature 140°F
Direct all questions regarding this Solicitation, and any questions or Issues relating to the accessibility of this Solicitation (Including the appendices and exhibits to this Document, and any other document related to this Solicitation), to: Ralph, Peter J.